7205L35J8
| Parameters | |
|---|---|
| Density | 72 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 8KX9 |
7205L35J8 Overview
PLCC is the package in which FIFO memory chip is contained.Mounting it in the Surface Mount way is recommended.When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 32 terminations.There are 32 pins for operation.FIFO design requires a maximum current of 120mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.Normally, the component owns 5V power supplies.This gadget can also be used to generate RETRANSMIT .A clock running at frequency 22.2MHz is used by the FIFO memory IC.
7205L35J8 Features
FIFOs category
Clock frequency of 22.2MHz
7205L35J8 Applications
There are a lot of Integrated Device Technology (IDT) 7205L35J8 FIFOs Memory applications.
- MP3 Interface for Automobile
- Tape controllers
- Extended product-change notification
- PC peripheral
- Optical memories
- Portable Information Devices
- IP Camera Buffer
- Network switching/routing
- Temporary storage elements
- SPI Bus Flash Memory Device
