7205L50J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 9kB |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Frequency (Max) | 15MHz |
| Access Time | 50 ns |
| Data Bus Width | 9b |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L50J Overview
FIFO memory chip is included in the PLCC package.In addition to storing applications and data, the FIFO chips have a memory of 9kB .Surface Mount is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 5V .I found that it has 32 terminations in FIFO means.The operation pins are 32 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 120mA .A 5V supply voltage will ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 32 pins.During normal operation, the FIFO memory's maximum value is 15MHz .In normal circumstances, the component has 5V power supplies.This gadget can also be used to generate RETRANSMIT .Its enhanced flexibility is achieved with the usage of 1 circuits.
7205L50J Features
9kB memory size
FIFOs category
Frequency at most
7205L50J Applications
There are a lot of Integrated Device Technology (IDT) 7205L50J FIFOs Memory applications.
- Consumer
- General Data Collection Applications at Extreme High-Temperatures
- HDD
- Data
- Disk Controllers
- Desktop Computers
- Laser Receiver System
- Multi-stage synchronizer
- Emulators
- Signal processing
