7205L50P
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
7205L50P Overview
PDIP is the package in which FIFO memory chip is contained.Bulk case is used for packaging.Memory IC's recommended mounted way is Through Hole .An input voltage of 5V results in high efficiency.As a result of this, FIFO means contains 28 terminations.28 pins are the operation pins.There is a maximum current requirement of 120mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.This gadget is self-contained in?FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.The FIFO memory IC is equipped with a total of 28 pins.It is normal for the component to own 5V power supplies.This gadget can also generate RETRANSMIT .The FIFO memory IC is controlled by a clock with a frequency of 15MHz .
7205L50P Features
FIFOs category
Clock frequency of 15MHz
7205L50P Applications
There are a lot of Integrated Device Technology (IDT) 7205L50P FIFOs Memory applications.
- Wireless
- Computer Systems
- Address mapping
- General Data Collection Applications at Low-Temperatures
- Routers
- Optical memories
- Consumer Systems
- A/D output buffers
- Emulators
- Game Consoles
