7206L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7206L15J8 Overview
PLCC is a package that contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.As a result of this, FIFO means contains 32 terminations.Operation pins are 32 .In order to operate FIFO design, a maximum current of 120mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.As a result, it contains a total of 32 pins.A component normally has 5V power supplies attached to it.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The clock of the FIFO memory IC runs at 40MHz frequency.
7206L15J8 Features
FIFOs category
Clock frequency of 40MHz
7206L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 7206L15J8 FIFOs Memory applications.
- Programmable Logic Controller
- Game Controller
- Event Recorder
- Consumer Systems
- SPI Bus Flash Memory Devices
- Microprogramming
- High-speed graphics pixel buffer
- Test site
- Extended product life cycle
- IP Camera Buffer
