7206L15P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7206L15P Overview
FIFO memory chip is contained in the PDIP package.It is recommended that memory IC be mounted in the Through Hole direction.An input voltage of 5V results in high efficiency.28 terminations are contained in FIFO means.FIFO design has 28 operation pins.FIFO requires a minimum of 120mA current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.As a result, it contains a total of 28 pins.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.There is 40MHz frequency set for the clock of the FIFO memory IC.
7206L15P Features
FIFOs category
Clock frequency of 40MHz
7206L15P Applications
There are a lot of Integrated Device Technology (IDT) 7206L15P FIFOs Memory applications.
- Cameras
- Transistors
- Data
- Magnetic memories
- Seismic Data Collection at Extreme Temperatures
- Programmable Logic Controller
- GPS Offender Tracking
- Video Processing
- Consumer Systems
- IP Camera Buffer
