7206L15TPG
| Parameters | |
|---|---|
| Access Time | 15 ns |
| Organization | 16KX9 |
| Memory Width | 9 |
| Standby Current-Max | 0.012A |
| Memory Density | 147456 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.671mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 28 |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
7206L15TPG Overview
DIP is a package that contains FIFO memory chip.Mounting it in the Through Hole way is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 28 terminations.28 pins are used for operation.FIFO requires a minimum of 120mA current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 28 pins.Normally, 5V power supplies are owned by the component.With the help of this FIFO memory, RETRANSMIT can also be generated.FIFO memory ICs run at a frequency of 40MHz .
7206L15TPG Features
FIFOs category
Clock frequency of 40MHz
7206L15TPG Applications
There are a lot of Integrated Device Technology (IDT) 7206L15TPG FIFOs Memory applications.
- Data-acquisition systems
- Game Controller
- Computer Systems
- Queues for communication systems
- SPD for DDR3 Memory Modules
- Video
- Signal processing
- Controlled baseline
- Portable Information Devices
- Networking
