7206L20P
| Parameters | |
|---|---|
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
7206L20P Overview
PDIP is the package in which FIFO memory chip is contained.It is recommended that memory IC be mounted in the Through Hole direction.With a supply voltage of 5V volts, high efficiency is possible.I found that it has 28 terminations in FIFO means.28 pin is used for operation.The maximum current required for its operation is 120mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 28 pins on this FIFO memory IC.Normally, 5V power supplies are owned by the component.With the help of this FIFO memory, RETRANSMIT can also be generated.This FIFO memory IC has a clock frequency of 33.3MHz .
7206L20P Features
FIFOs category
Clock frequency of 33.3MHz
7206L20P Applications
There are a lot of Integrated Device Technology (IDT) 7206L20P FIFOs Memory applications.
- Data
- Signal processing
- Battery Charger
- MP3 Interface for Automobile
- A/D output buffers
- Queues for communication systems
- Extended product life cycle
- Video
- Video Processing
- Application that requires re-writable nonvolatile parameter memory
