7206L20TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 16KX9 |
| Standby Current-Max | 0.002A |
| Memory Density | 147456 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7206L20TP Overview
FIFO memory chip is contained in the PDIP package.It is pointing in the direction of Through Hole .A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 28 terminations.The operation pins are 28 pins.Its maximum operating current is 120mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.Its maximum operating temperature of 70°C °C ensures stable operation.In FIFOs , this gadget is self-contained.In this part, the memory type is OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Approximately 28 pins are attached to it.It is normal for a component to be equipped with 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .In this FIFO memory IC, the clock runs at frequency 33.3MHz .
7206L20TP Features
FIFOs category
Clock frequency of 33.3MHz
7206L20TP Applications
There are a lot of Integrated Device Technology (IDT) 7206L20TP FIFOs Memory applications.
- Signal processing
- Firmware loaders
- Video
- Wireless
- General Data Collection Applications at Extreme High-Temperatures
- IP Radio
- Network switching/routing
- Multi-stage synchronizer
- Medical Monitoring Device
- Multimedia
