7206L25TPI
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Access Time | 25 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7206L25TPI Overview
PDIP is the package in which FIFO memory chip is contained.Mounting it in Through Hole is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .As a result of this, FIFO means contains 28 terminations.The operation pins are 28 pins.For its operation, 120mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.As a result, it contains a total of 28 pins.Components normally possess 5V power supplies.Using this gadget, RETRANSMIT can also be generated.
7206L25TPI Features
FIFOs category
7206L25TPI Applications
There are a lot of Integrated Device Technology (IDT) 7206L25TPI FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Microprogramming
- IP Camera Buffer
- Smart Meter
- Analog-to-digital converters
- Routers
- Product traceability
- Signal processing
- Telecommunication
- Alarm System
