7206L30DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.012A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.2mm |
| Width | 15.24mm |
| Thickness | 1.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7206L30DB Overview
FIFO memory chip is contained in the CDIP package.It's packaged in the shape of a Bulk .Mounting it in Through Hole is recommended.When the supply voltage is 5V there is the possibility of high efficiency.FIFO consists of 28 terminations, which indicates that FIFO means is empty.28 pin is used for operation.In order for FIFO design to operate, a maximum current of 150mA is required.In order to maximize efficiency, the supply voltage should be set to 5V .It is designed to run at a minimum temperature of -55°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 125°C °C.It is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 28 pins on this FIFO memory IC.It is normal for the component to own 5V power supplies.This gadget can also generate RETRANSMIT .A clock running at frequency 25MHz is used by the FIFO memory IC.
7206L30DB Features
FIFOs category
Clock frequency of 25MHz
7206L30DB Applications
There are a lot of Integrated Device Technology (IDT) 7206L30DB FIFOs Memory applications.
- Controlled baseline
- Video time base correction
- Telecommunication
- Measurement Equipment
- Microprogramming
- Networking
- PC peripheral
- Computers
- Programmable Logic Controller
- Rate buffers
