7206L30LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2012 |
| Part Status | Active |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Access Time | 30 ns |
| Direction | Unidirectional |
| Density | 144 kb |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Programmable Flags Support | No |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7206L30LB Overview
LCC is the package in which FIFO memory chip is contained.It is pointing in the direction of Surface Mount .There are 32 pins for operation.For its operation, 150mA is the maximum current required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.Keeping the temperature at -55°C degrees Celsius ensures its reliability.Keeping the operating temperature at 125°C °C allows the FIFO products to operate continuously.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.
7206L30LB Features
7206L30LB Applications
There are a lot of Integrated Device Technology (IDT) 7206L30LB FIFOs Memory applications.
- Data
- Fabrication Site
- SPI Bus Flash Memory Device
- Communications Systems
- Medical Monitoring Device
- Programmable Logic Controller
- Networking
- SPI Bus Flash Memory Devices
- IP Camera Buffer
- SPD for DDR3 Memory Modules
