7206L50J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7206L50J8 Overview
PLCC is a package that contains FIFO memory chip.Mounting it in Surface Mount is recommended.A supply voltage of 5V allows for high efficiency.In FIFO means, there are 32 terminations.As far as the operation pins are concerned, they are 32 pins.In order for FIFO design to operate, a maximum current of 120mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , there is a self-contained gadget.The IC of the part is OTHER FIFO memory type.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.It consists of a total of 32 pins.In normal circumstances, the component has 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.There is 15MHz frequency set for the clock of the FIFO memory IC.
7206L50J8 Features
FIFOs category
Clock frequency of 15MHz
7206L50J8 Applications
There are a lot of Integrated Device Technology (IDT) 7206L50J8 FIFOs Memory applications.
- Queues for communication systems
- Network bridges
- Measurement Equipment
- Network switching/routing
- PC peripheral
- Networking
- Multimedia
- Transistors
- Application that requires re-writable nonvolatile parameter memory
- Look-up Tables
