7207L20DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.012A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.2mm |
| Width | 15.24mm |
| Thickness | 1.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L20DB Overview
FIFO memory chip can be found in the CDIP package.It's packaged in the shape of a Bulk .It is pointing in the direction of Through Hole .When the supply voltage is 5V , high efficiency is possible.FIFO means contains 28 terminations.28 pin is used for operation.In order to operate it, it requires 150mA volts of current.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of -55°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 125°C °C.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.Currently, it has 28 pins.There are normally 5V power supplies attached to the component.It is also possible to generate RETRANSMIT by using this FIFO memory.The FIFO memory IC is controlled by a clock with a frequency of 33.3MHz .
7207L20DB Features
FIFOs category
Clock frequency of 33.3MHz
7207L20DB Applications
There are a lot of Integrated Device Technology (IDT) 7207L20DB FIFOs Memory applications.
- Alarm System
- Communications
- Game Controller
- Rate buffers
- A/D output buffers
- Test Equipment
- Signal processing
- Desktop Computers
- One assembly
- Communications Systems
