Parameters |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
120mA |
Max Supply Current |
120mA |
Clock Frequency |
33.3MHz |
Access Time |
20 ns |
Density |
288 kb |
Standby Current-Max |
0.008A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Asynchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
No |
Output Enable |
NO |
Cycle Time |
30 ns |
Height Seated (Max) |
3.556mm |
Length |
13.97mm |
Width |
11.43mm |
Thickness |
2.79mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
32 |
Published |
2005 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
RETRANSMIT |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Pin Count |
32 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
7207L20J8 Overview
The PLCC package contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.With a supply voltage of 5V volts, high efficiency is possible.As a result of this, FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.The maximum current required for its operation is 120mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.The FIFO memory IC has a total of 32 pins.Normaly, the component is powered by 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.FIFO memory ICs run at a frequency of 33.3MHz .
7207L20J8 Features
FIFOs category
Clock frequency of 33.3MHz
7207L20J8 Applications
There are a lot of Integrated Device Technology (IDT) 7207L20J8 FIFOs Memory applications.
- Programmable Logic Controller
- Extended product life cycle
- SPD for DDR3 Memory Modules
- Wireless
- Seismic Data Collection at Extreme Temperatures
- Magnetic memories
- General Data Collection Applications at Low-Temperatures
- GPS Offender Tracking
- Desktop Computers
- Event Recorder