7207L20LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | CLCC |
| Number of Pins | 32 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 150mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Standby Current-Max | 0.012A |
| Memory Density | 294912 bit |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L20LB Overview
FIFO memory chip is contained in the CLCC package.The recommended mounting method for this FIFO products is Surface Mount .High efficiency is possible with a supply voltage of 5V .In FIFO means, there are 32 terminations.The operation pins are 32 pins.In order for FIFO design to operate, a maximum current of 150mA is required.A supply voltage of 5V is recommended for FIFO's maximum efficiency.Keeping the temperature at -55°C degrees Celsius ensures its reliability.By using a memory logic's maximum operating temperature of 125°C degrees Celsius, stable operation can be achieved.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.Low supply voltages, such as 4.5V V, may be required for operation.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.It consists of a total of 32 pins.Normaly, the component is powered by 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .A clock running at frequency 33.3MHz is used by the FIFO memory IC.
7207L20LB Features
FIFOs category
Clock frequency of 33.3MHz
7207L20LB Applications
There are a lot of Integrated Device Technology (IDT) 7207L20LB FIFOs Memory applications.
- Switches
- Smart Meter
- Down-Hole Energy Drilling
- Seismic Data Collection at Extreme Temperatures
- Signal processing
- Controlled baseline
- Portable Information Devices
- Test site
- High-speed disk
- Rate buffers
