7207L20LB8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Density | 288 kb |
| Standby Current-Max | 0.012A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L20LB8 Overview
FIFO memory chip is included in the LCC package.In the shape of a Tape & Reel , it's packaged.Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 32 terminations.32 pins are used for operation.FIFO design requires 150mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.This FIFO products runs at -55°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 125°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.The component normally owns 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.A clock on the FIFO memory IC runs at a frequency of 33.3MHz .
7207L20LB8 Features
FIFOs category
Clock frequency of 33.3MHz
7207L20LB8 Applications
There are a lot of Integrated Device Technology (IDT) 7207L20LB8 FIFOs Memory applications.
- Game Controller
- Signal processing
- IP Radio
- General Data Collection Applications at Extreme High-Temperatures
- Measurement Equipment
- Video Processing
- Multimedia
- Alarm System
- Video
- Notebook
