7207L20P
| Parameters | |
|---|---|
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
7207L20P Overview
You can find FIFO memory chip in package PDIP .It is pointing in the direction of Through Hole .Supply voltages of 5V are capable of achieving high efficiency.28 terminations are contained in FIFO means.28 pin is used for operation.In order to operate it, it requires 120mA volts of current.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.The FIFO memory IC has a total of 28 pins.In normal circumstances, the component has 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.This FIFO memory IC has a clock frequency of 33.3MHz .
7207L20P Features
FIFOs category
Clock frequency of 33.3MHz
7207L20P Applications
There are a lot of Integrated Device Technology (IDT) 7207L20P FIFOs Memory applications.
- Cameras
- Video time base correction
- Analog-to-digital converters
- Look-up Tables
- Communications
- Consumer
- IP Radio
- High-speed disk
- Medical Monitoring Device
- Consumer Systems
