7207L25J8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Density | 288 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
7207L25J8 Overview
PLCC is the package in which FIFO memory chip is contained.It's packaged in the shape of a Tape & Reel .Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO consists of 32 terminations, which indicates that FIFO means is empty.The operation pins are 32 pins.Its maximum operating current is 120mA .In order to maximize efficiency, the supply voltage should be set to 5V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.An operating temperature of 70°C °C is necessary for stable operation.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 32 pins.In normal circumstances, the component has 5V power supplies.Using this gadget, RETRANSMIT can also be generated.A clock on the FIFO memory IC runs at a frequency of 28.5MHz .
7207L25J8 Features
FIFOs category
Clock frequency of 28.5MHz
7207L25J8 Applications
There are a lot of Integrated Device Technology (IDT) 7207L25J8 FIFOs Memory applications.
- Networking
- High-speed graphics pixel buffer
- Alarm System
- Magnetic memories
- Medical Monitoring Device
- GPS Offender Tracking
- Smart Meter
- Cameras
- Microprogramming
- Measurement Equipment
