7207L25JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Density | 288 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L25JI Overview
You can find FIFO memory chip in package PLCC .The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .FIFO means contains 32 terminations.32 pins are the operation pins.In order for FIFO design to operate, a maximum current of 120mA is required.In order to maximize efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.FIFOs contains this gadget in its entirety.ICs of type OTHER FIFO are used in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 32 pins.In normal circumstances, the component has 5V power supplies.Using this gadget, RETRANSMIT can also be generated.The clock of the FIFO memory IC runs at 28.5MHz frequency.
7207L25JI Features
FIFOs category
Clock frequency of 28.5MHz
7207L25JI Applications
There are a lot of Integrated Device Technology (IDT) 7207L25JI FIFOs Memory applications.
- Magnetic memories
- Optical memories
- Computers
- Telecommunication
- Tape controllers
- Microprogramming
- Communications
- Fabrication Site
- Routers
- SPI Bus Flash Memory Device
