7207L25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Density | 288 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L25JI8 Overview
This package is included in PLCC .It is pointing in the direction of Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.In FIFO means, there are 32 terminations.Operation pins are 32 .In order for FIFO design to operate, FIFO design requires a maximum current of 120mA .A 5V supply voltage will ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is of the type OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 32 pins on this board.It is normal for a component to be equipped with 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.FIFO memory ICs run at a frequency of 28.5MHz .
7207L25JI8 Features
FIFOs category
Clock frequency of 28.5MHz
7207L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 7207L25JI8 FIFOs Memory applications.
- Multi-stage synchronizer
- SPI Bus Flash Memory Devices
- Code converters
- Address mapping
- Magnetic memories
- Medical Monitoring Device
- Seismic Data Collection at Extreme Temperatures
- Tape controllers
- IP Camera Buffer
- Switches
