7207L30DB
| Parameters | |
|---|---|
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.012A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.2mm |
| Width | 15.24mm |
| Thickness | 1.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
7207L30DB Overview
FIFO memory chip can be found in the CDIP package.Bulk case is used for packaging.The recommended mounting way is Through Hole .A supply voltage of 5V allows for high efficiency.28 terminations are contained in FIFO means.In the case of the operation pins, they are 28 pins.In order to operate FIFO design, a maximum current of 150mA is required.A supply voltage of 5V is recommended for FIFO's maximum efficiency.FIFO operates at a minimum temperature of -55°C degrees Celsius to ensure reliabilFIFOy.By operating at 125°C degrees Celsius, this FIFO products is able to maintain a stable operation.This gadget is self-contained in?FIFOs .It has a OTHER FIFO memory type IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 28 pins on this board.There are normally 5V power supplies attached to the component.It is also possible to generate RETRANSMIT with the use of this FIFO memory.There is 25MHz frequency set for the clock of the FIFO memory IC.
7207L30DB Features
FIFOs category
Clock frequency of 25MHz
7207L30DB Applications
There are a lot of Integrated Device Technology (IDT) 7207L30DB FIFOs Memory applications.
- One assembly
- SPI Bus Flash Memory Device
- IP Radio
- Controlled baseline
- Game Controller
- Wireless
- High-speed graphics pixel buffer
- Rate buffers
- Consumer Systems
- Multimedia
