7207L30LB
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Density | 288 kb |
| Standby Current-Max | 0.012A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
7207L30LB Overview
You will find FIFO memory chip in the LCC package.The recommended mounting method for this FIFO products is Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.A total of 32 terminations can be found in FIFO means.There are 32 pins on the operation pins.For its operation, 150mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 5V .In order to ensure reliability, FIFO is maintained at -55°C degrees Celsius at all times.Keeping the operating temperature at 125°C °C allows the FIFO products to operate continuously.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.Currently, it has 32 pins.Normaly, the component is powered by 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.There is 25MHz frequency set for the clock of the FIFO memory IC.
7207L30LB Features
FIFOs category
Clock frequency of 25MHz
7207L30LB Applications
There are a lot of Integrated Device Technology (IDT) 7207L30LB FIFOs Memory applications.
- Microprogramming
- IP Radio
- Video time base correction
- Consumer
- Game Controller
- High-speed graphics pixel buffer
- One assembly
- Controlled baseline
- Temporary storage elements
- Alarm System
