7207L30LB8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Density | 288 kb |
| Standby Current-Max | 0.012A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L30LB8 Overview
LCC is the package in which FIFO memory chip is contained.In this case, it is packaged in case number Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 5V allows for high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pin is used for operation.There is a maximum current requirement of 150mA for its operation.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of -55°C degrees Celsius.The memory logic's maximum operating temperature is 125°C °C, which allows for stable operation.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.Approximately 32 pins are attached to it.It is normal for a component to be equipped with 5V power supplies.The gadget can also generate a value of RETRANSMIT .There is 25MHz frequency set for the clock of the FIFO memory IC.
7207L30LB8 Features
FIFOs category
Clock frequency of 25MHz
7207L30LB8 Applications
There are a lot of Integrated Device Technology (IDT) 7207L30LB8 FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- IP Radio
- Code converters
- Medical Monitoring Device
- Network switching/routing
- Networking
- IP Camera Buffer
- Rate buffers
- Extended product life cycle
- Communications Systems
