7207L35J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 36kB |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Frequency (Max) | 22.22MHz |
| Access Time | 35 ns |
| Data Bus Width | 9b |
| Density | 288 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L35J Overview
The PLCC package contains FIFO memory chip.Apps and data can be stored in the 36kB memory of the FIFO chip.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.A total of 32 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 32 pins.FIFO requires a minimum of 120mA current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.There is a self-contained gadget within FIFOs .The IC of the part is of the type OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.The FIFO memory IC is equipped with a total of 32 pins.Regular operation has a FIFO memory's maximum value of 22.22MHz .A component normally has 5V power supplies attached to it.It is also possible to generate RETRANSMIT with the use of this FIFO memory.There is 22.2MHz frequency set for the clock of the FIFO memory IC.The 1 circuit is used in order to enhance its flexibility.
7207L35J Features
36kB memory size
FIFOs category
Frequency at most
Clock frequency of 22.2MHz
7207L35J Applications
There are a lot of Integrated Device Technology (IDT) 7207L35J FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Game Controller
- Alarm System
- Temporary storage elements
- Application that requires re-writable nonvolatile parameter memory
- Computers
- PC peripheral
- MP3 Interface for Automobile
- Test Equipment
- Video time base correction
