7207L35J8
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Density | 288 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
7207L35J8 Overview
You will find FIFO memory chip in the PLCC package.Surface Mount is recommended as the mounting method.An input voltage of 5V results in high efficiency.32 terminations are contained in FIFO means.The operation pins are 32 pins.In order to operate FIFO design, a maximum current of 120mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this board.A component normally has 5V power supplies attached to it.It is also possible to generate RETRANSMIT by using this FIFO memory.FIFO memory ICs run at a frequency of 22.2MHz .
7207L35J8 Features
FIFOs category
Clock frequency of 22.2MHz
7207L35J8 Applications
There are a lot of Integrated Device Technology (IDT) 7207L35J8 FIFOs Memory applications.
- Computer Systems
- Computer networks
- TVs
- Character generators
- Analog-to-digital converters
- PC peripheral
- Tape controllers
- Battery Charger
- Video time base correction
- IP Camera Buffer
