7207L50J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Density | 288 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L50J Overview
You can find FIFO memory chip in package PLCC .The recommended mounting method for this FIFO products is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.I found that it has 32 terminations in FIFO means.The operation pins are 32 pins.FIFO design requires 120mA amps of current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 32 pins.There are normally 5V power supplies attached to the component.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The FIFO memory IC is controlled by a clock with a frequency of 15MHz .
7207L50J Features
FIFOs category
Clock frequency of 15MHz
7207L50J Applications
There are a lot of Integrated Device Technology (IDT) 7207L50J FIFOs Memory applications.
- IP Radio
- Optical memories
- Network switching/routing
- Tape controllers
- Cardiac Monitoring Device
- Communications
- Look-up Tables
- Magnetic memories
- SPI Bus Flash Memory Devices
- Alarm System
