7207L50J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Density | 288 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L50J8 Overview
This package is included in PLCC .Mounting it Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains a total of 32 terminations.There are 32 pins on the operation pins.In order to operate FIFO design, a maximum current of 120mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , this gadget is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.It is normal for the component to own 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.The FIFO memory IC runs at a frequency of 15MHz .
7207L50J8 Features
FIFOs category
Clock frequency of 15MHz
7207L50J8 Applications
There are a lot of Integrated Device Technology (IDT) 7207L50J8 FIFOs Memory applications.
- Transistors
- Analog-to-digital converters
- Smart Meter
- Extended product life cycle
- Rate buffers
- Portable Information Devices
- Data
- SPI Bus Flash Memory Device
- High-speed disk
- Extended product-change notification
