7207L50P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Frequency (Max) | 15MHz |
| Access Time | 50 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Density | 288 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7207L50P Overview
You can find FIFO memory chip in the PDIP package.In terms of packaging, it comes in Bulk cases.Mounting it Through Hole is recommended.High efficiency is possible with a supply voltage of 5V .FIFO means contains 28 terminations.28 pin is used for operation.For its operation, 120mA is the maximum current required.A voltage of 5V should be used for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.There is a self-contained gadget within FIFOs .The IC of the part is of the type OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.A total of 28 pins are present on the FIFO memory IC.15MHz is the FIFO memory IC's maximum value for regular operation.There are normally 5V power supplies attached to the component.It is also possible to generate RETRANSMIT with the use of this FIFO memory.With 2 circuits, FIFO memory chip offers enhanced flexibility.
7207L50P Features
FIFOs category
Frequency at most
7207L50P Applications
There are a lot of Integrated Device Technology (IDT) 7207L50P FIFOs Memory applications.
- Network switching/routing
- Desktop Computers
- Video
- Portable Information Devices
- SPD for DDR3 Memory Modules
- Programmable Logic Controller
- Seismic Data Collection at Extreme Temperatures
- General Data Collection Applications at Low-Temperatures
- Buses
- Computer networks
