7208L20J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 64kB |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Frequency (Max) | 28.5MHz |
| Access Time | 20 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 64KX9 |
| Density | 576 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7208L20J Overview
FIFO memory chip is contained in the PLCC package.In addition to storing applications and data, the FIFO chips have a memory of 64kB .It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 5V allows for high efficiency.FIFO means contains 32 terminations.32 pin is used for operation.There is a maximum current requirement of 120mA for its operation.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.It has a total of 32 pins on it.A FIFO memory's maximum value of 28.5MHz can be used for regular operation.A component normally has 5V power supplies attached to it.This gadget can also generate RETRANSMIT .There is 33.3MHz frequency set for the clock of the FIFO memory IC.Using 2 circuits allows for enhanced flexibility.
7208L20J Features
64kB memory size
FIFOs category
Frequency at most
Clock frequency of 33.3MHz
7208L20J Applications
There are a lot of Integrated Device Technology (IDT) 7208L20J FIFOs Memory applications.
- Switches
- Extended product-change notification
- Seismic Data Collection at Extreme Temperatures
- Application that requires re-writable nonvolatile parameter memory
- Alarm System
- Consumer Systems
- Wireless
- Cameras
- General Data Collection Applications at Low-Temperatures
- Medical Monitoring Device
