7208L25JGI
| Parameters | |
|---|---|
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 64KX9 |
| Density | 576 kb |
7208L25JGI Overview
The PLCC package contains FIFO memory chip.Mounting it Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 32 terminations, which indicates that FIFO means is empty.These are the 32 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 120mA .FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.The gadget in FIFOs is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.This FIFO memory IC is equipped with 32 pins in total.There are normally 5V power supplies attached to the component.FIFO memory ICs run at a frequency of 28.5MHz .
7208L25JGI Features
FIFOs category
Clock frequency of 28.5MHz
7208L25JGI Applications
There are a lot of Integrated Device Technology (IDT) 7208L25JGI FIFOs Memory applications.
- Cameras
- Desktop Computers
- Rate buffers
- GPS Offender Tracking
- General Data Collection Applications at Extreme High-Temperatures
- Measurement Equipment
- Communications Systems
- One assembly
- Down-Hole Energy Drilling
- Notebook
