7208L25JGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 120mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 64KX9 |
| Standby Current-Max | 0.012A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7208L25JGI8 Overview
You will find FIFO memory chip in the LCC package.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 32 terminations.As far as the operation pins are concerned, they are 32 pins.For its operation, 120mA is the maximum current required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.FIFOs contains this gadget in its entirety.It has a type OTHER FIFO memory IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.There are normally 5V power supplies attached to the component.This FIFO memory IC operates at a frequency of 28.5MHz .
7208L25JGI8 Features
FIFOs category
Clock frequency of 28.5MHz
7208L25JGI8 Applications
There are a lot of Integrated Device Technology (IDT) 7208L25JGI8 FIFOs Memory applications.
- Network switching/routing
- High-speed graphics pixel buffer
- Application that requires re-writable nonvolatile parameter memory
- Smart Meter
- Measurement Equipment
- Cardiac Monitoring Device
- Emulators
- Digital buffering
- General Data Collection Applications at Extreme High-Temperatures
- Seismic Data Collection at Extreme Temperatures
