72125L25SOG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 28 |
| Published | 1999 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 50MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 50MHz |
| Access Time | 25 ns |
| Direction | Unidirectional |
| Density | 16 kb |
| Sync/Async | Synchronous |
| Word Size | 16b |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | No |
| Length | 17.9mm |
| Width | 8.4mm |
| Thickness | 2.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72125L25SOG8 Overview
The SOIC package contains FIFO memory chip.Mounting it Surface Mount is recommended.28 pin is used for operation.Its maximum operating current is 100mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFO may operate at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.A frequency of 50MHz is sufficient to maintain good accuracy.There is 50MHz FIFO memory IC's maximum value for regular operation.
72125L25SOG8 Features
Frequency at most
72125L25SOG8 Applications
There are a lot of Integrated Device Technology (IDT) 72125L25SOG8 FIFOs Memory applications.
- Fabrication Site
- Desktop Computers
- HDD
- SPI Bus Flash Memory Device
- Multimedia
- Notebook
- IP Camera Buffer
- Programmable Logic Controller
- Application that requires re-writable nonvolatile parameter memory
- Test Equipment
