72125L25TPG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 28 |
| Published | 1999 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 100mA |
| Frequency (Max) | 50MHz |
| Access Time | 25 ns |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | No |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72125L25TPG Overview
The DIP package contains FIFO memory chip.Through Hole is recommended as the mounting method.FIFO design has 28 operation pins.FIFO requires a minimum of 100mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.For regular operation, the memory logic's maximum value is 50MHz .
72125L25TPG Features
Frequency at most
72125L25TPG Applications
There are a lot of Integrated Device Technology (IDT) 72125L25TPG FIFOs Memory applications.
- Switches
- Rate buffers
- Fabrication Site
- Portable Information Devices
- One assembly
- Test Equipment
- Consumer
- Video
- Notebook
- General Data Collection Applications at Extreme High-Temperatures
