72200L10TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 100MHz |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X8 |
| Density | 2 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 8b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72200L10TP Overview
The PDIP package contains FIFO memory chip.Memory IC's recommended mounted way is Through Hole .Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 28 terminations.As far as the operation pins are concerned, they are 28 pins.FIFO design requires 40mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.As a result, it contains a total of 28 pins.In the presence of a 100MHz frequency, it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .Normally, the component owns 5V power supplies.
72200L10TP Features
FIFOs category
Frequency at most
72200L10TP Applications
There are a lot of Integrated Device Technology (IDT) 72200L10TP FIFOs Memory applications.
- Event Recorder
- General Data Collection Applications at Low-Temperatures
- Signal processing
- Computers
- Laser Receiver System
- One assembly
- Analog-to-digital converters
- Communications Systems
- Rate buffers
- Telecommunication
