72201L10JG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Direction | Unidirectional |
| Density | 2.3 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72201L10JG8 Overview
FIFO memory chip can be found in the PLCC package.It is recommended that memory IC be mounted in the Surface Mount direction.There are 32 pins on the operation pins.Its maximum operating current is 35mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.In the presence of a 100MHz frequency, it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .
72201L10JG8 Features
Frequency at most
72201L10JG8 Applications
There are a lot of Integrated Device Technology (IDT) 72201L10JG8 FIFOs Memory applications.
- Video
- IP Camera Buffer
- Optical memories
- Alarm System
- Product traceability
- MP3 Interface for Automobile
- Firmware loaders
- Cardiac Monitoring Device
- Telecommunication
- General Data Collection Applications at Low-Temperatures
