72201L10PF
| Parameters | |
|---|---|
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
72201L10PF Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it in the Surface Mount way is recommended.An input voltage of 5V results in high efficiency.In FIFO means, there are 32 terminations.Operation pins are 32 .In order to operate it, it requires 35mA volts of current.In order to maximize efficiency, the supply voltage should be set to 5V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.There are a total of 32 pins on this FIFO memory IC.A frequency of 100MHz is sufficient to maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.Normally, 5V power supplies are owned by the component.
72201L10PF Features
FIFOs category
Frequency at most
72201L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72201L10PF FIFOs Memory applications.
- Cameras
- Consumer
- Communications Systems
- Look-up Tables
- Computer Systems
- Smart Meter
- Game Consoles
- Switches
- Programmable Logic Controller
- Test Equipment
