72201L10PFG8
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
72201L10PFG8 Overview
You can find FIFO memory chip in package TQFP .It's packaged in the shape of a Tape & Reel .Mounting it in the Surface Mount way is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 32 terminations can be found in FIFO means.There are 32 pins for operation.Its maximum operating current is 35mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .Normaly, the component is powered by 5V power supplies.
72201L10PFG8 Features
FIFOs category
Frequency at most
72201L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72201L10PFG8 FIFOs Memory applications.
- IP Radio
- Fabrication Site
- Firmware loaders
- Down-Hole Energy Drilling
- Computer Systems
- Data
- Industrial Systems
- Portable Information Devices
- Portable Information Devices
- Disk Controllers
