Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
32 |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Frequency |
66.7MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
32 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
35mA |
Max Supply Current |
35mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
256X9 |
Density |
2.3 kb |
Standby Current-Max |
0.005A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
3.5mm |
Length |
13.97mm |
Width |
11.43mm |
Thickness |
2.79mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72201L15J Overview
FIFO memory chip can be found in the PLCC package.Surface Mount is memory IC's recommended mounting method.An input voltage of 5V results in high efficiency.The number of terminations in FIFO means is 32 .32 pins are used for operation.FIFO requires a minimum of 35mA current to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Approximately 32 pins are attached to it.A frequency of 66.7MHz is capable of maintaining good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.Components normally possess 5V power supplies.
72201L15J Features
FIFOs category
Frequency at most
72201L15J Applications
There are a lot of Integrated Device Technology (IDT) 72201L15J FIFOs Memory applications.
- Fabrication Site
- MP3 Interface for Automobile
- Medical Monitoring Device
- Multi-stage synchronizer
- Network bridges
- Microprogramming
- Cardiac Monitoring Device
- HDD
- Telecommunication
- Wireless