Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
32 |
Published |
2005 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.8mm |
Frequency |
66.7MHz |
Pin Count |
32 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
35mA |
Max Supply Current |
35mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
256X9 |
Density |
2.3 kb |
Standby Current-Max |
0.08A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
1.6mm |
Length |
7mm |
Width |
7mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72201L15PF Overview
TQFP is a package that contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V there is the possibility of high efficiency.A total of 32 terminations are contained within FIFO means.32 pin is used for operation.The maximum current required for its operation is 35mA .FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.It operates at 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.Approximately 32 pins are attached to it.With a frequency of 66.7MHz , it exhibits good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .The component normally owns 5V power supplies.
72201L15PF Features
FIFOs category
Frequency at most
72201L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72201L15PF FIFOs Memory applications.
- Smart Meter
- Computers
- GPS Offender Tracking
- General Data Collection Applications at Low-Temperatures
- Battery Charger
- Down-Hole Energy Drilling
- HDD
- Alarm System
- Disk Controllers
- General Data Collection Applications at Extreme High-Temperatures