72201L25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 256B |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.08A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72201L25J Overview
You will find FIFO memory chip in the PLCC package.A FIFO chip's memory is 256B , which may be used to store applications and data.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 5V results in high efficiency.A total of 32 terminations can be found in FIFO means.The operation pins are 32 pins.The maximum current required for its operation is 35mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.There are a total of 32 pins on this board.When the frequency is set to 40MHz it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 40MHz .It is normal for a component to be equipped with 5V power supplies.By using 1 circuits, FIFO memory chip has greater flexibility.
72201L25J Features
256B memory size
FIFOs category
Frequency at most
72201L25J Applications
There are a lot of Integrated Device Technology (IDT) 72201L25J FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Extended product life cycle
- Network bridges
- Communications Systems
- Disk Controllers
- Code converters
- Portable Information Devices
- Data communications
- Magnetic memories
- Programmable Logic Controller
