72201L25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72201L25JI8 Overview
FIFO memory chip is included in the PLCC package.A Surface Mount mounting method is recommended.An input voltage of 5V results in high efficiency.I found that it has 32 terminations in FIFO means.The operation pins are 32 pins.The maximum current required for its operation is 35mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.It consists of a total of 32 pins.With a frequency of 40MHz , it exhibits good accuracy.Normally, the FIFO memory's maximum value is 40MHz .The component normally owns 5V power supplies.
72201L25JI8 Features
FIFOs category
Frequency at most
72201L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72201L25JI8 FIFOs Memory applications.
- HDD
- Product traceability
- Laser Receiver System
- MP3 Interface for Automobile
- Networking
- Address mapping
- Temporary storage elements
- Industrial Systems
- Controlled baseline
- Down-Hole Energy Drilling
