72201L25PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Standby Current-Max | 0.08A |
| Memory Density | 2304 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72201L25PF8 Overview
LQFP is the package in which FIFO memory chip is contained.This FIFO memory chip is packaged as a Tape & Reel .Mounting it in Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.As a result of this, FIFO means contains 32 terminations.There are 32 pins for operation.FIFO design requires a maximum current of 35mA to operate.A voltage of 5V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , there is a self-contained gadget.A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 32 pins in total.During regular operation, 40MHz is the FIFO memory's maximum value.A component normally has 5V power supplies attached to it.
72201L25PF8 Features
FIFOs category
Frequency at most
72201L25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72201L25PF8 FIFOs Memory applications.
- Rate buffers
- Address mapping
- Battery Charger
- Tape controllers
- High-speed graphics pixel buffer
- High-speed disk
- Data-acquisition systems
- One assembly
- Test Equipment
- Transistors
