72201L25PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72201L25PFI8 Overview
You will find FIFO memory chip in the TQFP package.In this case, it is packaged in case number Tape & Reel .Memory IC's recommended mounted way is Surface Mount .An input voltage of 5V results in high efficiency.A total of 32 terminations can be found in FIFO means.There are 32 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.There is a self-contained gadget within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.It has a total of 32 pins on it.In the presence of a 40MHz frequency, it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 40MHz .A component normally has 5V power supplies attached to it.
72201L25PFI8 Features
FIFOs category
Frequency at most
72201L25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72201L25PFI8 FIFOs Memory applications.
- Fabrication Site
- IP Radio
- Game Controller
- Emulators
- Network bridges
- Analog-to-digital converters
- Thermal Management for DDR3 Memory Modules
- Battery Charger
- Industrial Systems
- Notebook
