72205LB10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X18 |
| Standby Current-Max | 0.005A |
| Memory Density | 4608 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB10PF8 Overview
You can find FIFO memory chip in package LQFP .It is pointing in the direction of Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains 64 terminations.FIFO design has 64 operation pins.There is a maximum current requirement of 60mA for its operation.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.It consists of a total of 64 pins.During regular operation, the FIFO memory's maximum value is 100MHz .It is normal for a component to be equipped with 5V power supplies.
72205LB10PF8 Features
FIFOs category
Frequency at most
72205LB10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72205LB10PF8 FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- Disk Controllers
- HDD
- Queues for communication systems
- Alarm System
- Rate buffers
- Network switching/routing
- Game Controller
- High-speed disk
- Seismic Data Collection at Extreme Temperatures
