72205LB10TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB10TF Overview
You will find FIFO memory chip in the LQFP package.It is pointing in the direction of Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.A total of 64 terminations can be found in FIFO means.These are the 64 pins for operation.FIFO design requires 60mA amps of current to operate.A supply voltage of 5V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.A total of 64 pins are present on the FIFO memory IC.With a frequency of 100MHz , it maintains good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.Normaly, the component is powered by 5V power supplies.
72205LB10TF Features
FIFOs category
Frequency at most
72205LB10TF Applications
There are a lot of Integrated Device Technology (IDT) 72205LB10TF FIFOs Memory applications.
- Smart Meter
- Video
- General Data Collection Applications at Low-Temperatures
- TVs
- SPD for DDR3 Memory Modules
- Optical memories
- Industrial Systems
- PC peripheral
- General Data Collection Applications at Extreme High-Temperatures
- Transistors
