72205LB15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB15PFI Overview
You can find FIFO memory chip in package TQFP .It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 5V results in high efficiency.FIFO means contains 64 terminations.64 pin is used for operation.The maximum current required for its operation is 60mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.It is self-contained in FIFOs .It has a OTHER FIFO memory type IC.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.This FIFO memory IC is equipped with 64 pins in total.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .There are normally 5V power supplies attached to the component.
72205LB15PFI Features
FIFOs category
Frequency at most
72205LB15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72205LB15PFI FIFOs Memory applications.
- Wireless
- Video
- Video time base correction
- Tape controllers
- Emulators
- Signal processing
- Industrial Systems
- Consumer Systems
- Data communications
- Telecommunication
