72205LB15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB15PFI8 Overview
The TQFP package contains FIFO memory chip.There is a case Tape & Reel in which it is packaged.Mounting it Surface Mount is recommended.High efficiency is possible with a supply voltage of 5V .The number of terminations in FIFO means is 64 .FIFO design has 64 operation pins.In order for FIFO design to operate, a maximum current of 60mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 64 pins on this board.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .The component normally owns 5V power supplies.
72205LB15PFI8 Features
FIFOs category
Frequency at most
72205LB15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72205LB15PFI8 FIFOs Memory applications.
- Portable Information Devices
- MP3 Interface for Automobile
- High-speed graphics pixel buffer
- Game Controller
- Multi-stage synchronizer
- Video Processing
- Buses
- Computer networks
- Communications
- Seismic Data Collection at Extreme Temperatures
