72205LB25PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB25PF Overview
You will find FIFO memory chip in the TQFP package.Surface Mount is memory IC's recommended mounting method.With a supply voltage of 5V volts, high efficiency is possible.A total of 64 terminations can be found in FIFO means.There are 64 pins for operation.For its operation, 60mA is the maximum current required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 64 pins on this FIFO memory IC.With a frequency of 40MHz , it exhibits good accuracy.Regular operation has a FIFO memory's maximum value of 40MHz .Components normally possess 5V power supplies.
72205LB25PF Features
FIFOs category
Frequency at most
72205LB25PF Applications
There are a lot of Integrated Device Technology (IDT) 72205LB25PF FIFOs Memory applications.
- Product traceability
- Portable Information Devices
- High-speed graphics pixel buffer
- TVs
- Transistors
- Computer networks
- Desktop Computers
- Network bridges
- Data communications
- Analog-to-digital converters
