72205LB25PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB25PF8 Overview
FIFO memory chip is contained in the TQFP package.Mounting it in Surface Mount is recommended.High efficiency is possible with a supply voltage of 5V .FIFO means contains 64 terminations.The operation pins are 64 pins.In order to operate it, it requires 60mA volts of current.A 5V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.Approximately 64 pins are attached to it.It maintains good accuracy at a 40MHz frequency.Regular operation has a FIFO memory's maximum value of 40MHz .The component normally owns 5V power supplies.
72205LB25PF8 Features
FIFOs category
Frequency at most
72205LB25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72205LB25PF8 FIFOs Memory applications.
- PC peripheral
- Analog-to-digital converters
- Battery Charger
- Industrial Systems
- Consumer Systems
- Application that requires re-writable nonvolatile parameter memory
- Wireless
- Multimedia
- Communications
- Game Controller
