72205LB25PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB25PFI8 Overview
TQFP is a package that contains FIFO memory chip.In this case, it is packaged in case number Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 64 terminations.64 pins are used for operation.In order to operate FIFO design, a maximum current of 60mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It operates at -40°C degrees Celsius to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.As a result, it contains a total of 64 pins.With a frequency of 40MHz , it maintains good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.Normaly, the component is powered by 5V power supplies.
72205LB25PFI8 Features
FIFOs category
Frequency at most
72205LB25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72205LB25PFI8 FIFOs Memory applications.
- Firmware loaders
- Switches
- PC peripheral
- TVs
- Cardiac Monitoring Device
- Programmable Logic Controller
- Microprogramming
- Rate buffers
- Consumer Systems
- Optical memories
